Remote Control Rock Crawler

Browse our collection of RC Rock Crawler and accessories and you will find a wide variety of RC Rock Crawler from featured brands such as Axial.

BEEF TUBES AXIAL SCX10 XR Mod Beef Tubes - vast / Narrow - precious metal BT002AW


beef-tubes-axial-scx10-xr-mod-beef-tubes-wide-narrow-aluminum-bt002aw
Click image to enlarge...

 

>>> BEEF TUBES AXIAL SCX10 XR Mod Beef <<<


BEEF TUBES AXIAL SCX10 XR Mod Beef

Feature :

  • XR Mod Beef Tubes allow you to install Axial Wraith/XR10 c-hubs and knuckles alongside using XR10 universals to obtain up to 70 degrees of steering.

    The lighting weight precious metal adds minimal weight and was specially created using the U4 racers in mind.

    They also "Beef" up the axle housing itself to help continue from snapping the housing in half.

    Another benefit is that they give you a superb metal mount for the c-hub screws, instead of the stock plastic

Details :

These are an upgrade for the SCX10 axle housing that benefit the rig in several ways.

XR Mod Beef Tubes allow you to install Axial Wraith/XR10 c-hubs and knuckles on with the help of XR10 universals to obtain up to 70 degrees of steering.

The aluminium adds minimal weight and was assembled with the help of the U4 racers in mind.

They also "Beef" up the axle housing itself to help retain on from snapping the housing in half.

Another benefit is that they give you a superb metal mount for the c-hub screws, instead of the stock plastic that normally holds the c-hub screws and strips out easily.

They will produce the good results in equally the front and rear axles.

You will receive two SCX10 XR Mod Beef Tubes and two beauty rings (enough for one axle).

Tube weight = 1 o.z.

per set with the help of rings.

Team KNK Hardware is included! This diverse version allow for you to retain on the stock XR10 monitor width and will widen your SCX10 axle housing by 1/2" per side.


70 Degrees Of Steering.

The precious metal Adds Minimal Weight And Was created with The U4 Racers In Mind.

They Also "Beef" Up The Axle Housing Itself To Help retain From Snapping The Housing In Half.

Another Benefit
Is That They Give You A decent Metal Mount For The C-hub Screws, Instead Of The Stock Plastic That Normally Holds The C-hub Screws And Strips Out Easily.

They Will operate In every different The Front And Rear Axles.

You
Will Receive Two SCX10 XR Mod Beef Tubes And Two Beauty Rings (enough For One Axle).

Tube Weight = 1 O.z.

Per Set with Rings.

Team KNK Hardware Is Included! This vast Version allow You To retain The Stock XR10 course Width And Will Widen Your SCX10 Axle Housing By 1/2" Per Side.